The roof in your home is what will protect you from the rain and the sun. When you decide to frame your roof yourself, avoid common roof framing mistakes. Usually, simple steps done properly can help you save some money in the long run. It can also save you from the trouble of redoing your roof. Think about these problem areas to avoid costly repairs:
Using the wrong nails
This is a very simple rule. Use the proper nails for the job. If you use nails that are too short, they will not get good traction and can be displaced easily.
Determining the pitch
The pitch is simply how the roof slopes. Get the proper measurement to frame the roof properly. Double check the measurements when determining the pitch.
Be sure you lay out the drainage properly. Metal roofing experts in Utah recommend avoiding areas where water can accumulate because this might cause early corrosion.
Having proper ventilation will prevent moisture problems, and mold and mildew growth. However, before deciding on this, consider your area’s regulations on roof ventilation.
In line with drainage and ventilation, proper waterproofing will prevent corrosion, as well as unwanted mold and mildew growth. Treat the wood and apply waterproof paint.
Having the precise line length will ensure that your rafters fit properly upon installation. This is an important aspect of roof framing, so be sure you have the exact measurements.
Framing your own roof can be quite a task. Slight imperfections with installation can cause damages, which in turn can cost you twice as much as the installation itself. When you choose DIY, mind the common mistakes.